Red Jewelry Molding Rubber

Satek Red Jewelry Molding Rubber

Jewelry Molding rubber

Red Jewelry Molding Rubber

Satek Jewelry Rubber make quality molds that are tough and strong

Satek offer quality Jewelry Rubber at the most competitive prices.

SATEK has activities to sustain its customers with silicone paste that can be manufactured in any scale, form and strength according to the costumer’s order.

The model to be embedded in Satek Jewelry Molding Rubber must be perfectly clean and dry for production of the best possible molds

ewelry Molding Rubber gives waxes a smooth, shiny finish that won’t stick to the mold and shiny waxes mean less finishing

Silicone rubber molds are self-lubricating, they don’t require the use of spray release agents, reducing problems caused by the buildup of these agents on the molds. This property also makes it easier to release intricate, detailed designs from silicone rubber molds on the first try, versus the tinkering occasionally required to get the right amount of release agent in a natural rubber mold

Jewelry Mold Rubber For Lost Wax Casting

Strong enough to make complex mold
Less polishing of your castings
Mold cutting is much easier
The most competitive prices

Red Jewelry Molding Rubber Specification

The required vulcanization time prolongs with increasing thickness of the rubber layer.

The factors that affect the shrinkage rate of the rubber compound: the higher the curing temperature, the greater the shrinkage rate. In general, the temperature of each increase of 10 degrees C, the shrinkage rate increased by 0.2% ~ 0.5%

Safe temperature: 65°C longer than 20 minutes

Typical temperature: 90°C about 12 minutes.

We can be manufactured in any size

Packing Box Sizes